Seaview CG20PB Cable Seal up to 13.5mm Wire Size Black Plastic Cover 2-10mm Wire Size Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CG20PG Cable Seal 2-10mm Wire Size Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CG20PG2 Retrofit Cable Seal 2-10mm Wire Size Grey Plastic Cover

The Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables! In a new category of its own, the new Retrofit Cable Seal provides a watertight installation for your currently installed cables. No need to re-run your cables, simply install with your cable in place! The Seaview Retrofit Cable Seals provide a waterproof pass-through for antenna, transducer, lights, power and other cables without removal of the factory installed cable connector.

These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CG20PW Cable Seal up to 13.5mm Wire Size White Plastic Cover 2-10mm Wire Size Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview 12 Light Post - Requires Light Bar top

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.

You must then pick a Seaview light bar top. The most common is their LED combination masthead all-round light LTBLED12

Seaview SVLTP12LEDBLK 12 Light Post with LTBLED12 Navigation Light - Black

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.

Includes LTBLED12 round Seaview 3NM LED combination mast head allround light

• SVLTP12 12 in Light Post - Black
• LTBLED12 Navigation Light
"

Seaview SVLTP12LED 12in Light Post with LTBLED12 Navigation Light

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25in in diameter with a 2.75in round base plate.

Includes LTBLED12 round Seaview 3NM LED combination mast head allround light

• SVLTP12 12 Light Post
• LTBLED12 Navigation Light
"

Seaview SVWSVK24STLK Starlink Adapter Plate for 24 KVH Dome

• 316L stainless steel Starlink adapter with a 1 in-14 threaded fixed base on 1?4 in aluminum plate
• The 1/4 in aluminum plate is powder coated white and fits inside an empty KVH 24 in dome

** Dome not included

Seaview 24 Light Post - Requires Light Bar top

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.

You must then pick a Seaview light bar top. The most common is their LED combination masthead all-round light LTBLED12

Seaview SVLTP24LEDBLK 24 Light Post with LTBLED12 Navigation Light - Black

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.

Includes LTBLED12 round Seaview 3NM LED combination mast head allround light

• SVLTP24 24 in Light Post - Black
• LTBLED12 Navigation Light
"

Seaview SVLTP12LED 24in Light Post with LTBLED12 Navigation Light

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25in in diameter with a 2.75in round base plate.

Includes LTBLED12 round Seaview 3NM LED combination mast head allround light

• SVLTP24 24in Light Post
• LTBLED12 Navigation Light

Seaview 36 Light Post - Requires Light Bar top

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.

You must then pick a Seaview light bar top. The most common is their LED combination masthead all-round light LTBLED12

Seaview CG20SS Cable Seal 2-10mm Wire Size Polished SS Cover

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.

WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.

IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.

DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

Seaview CG20PG Cable Seal 2-10mm Wire Size Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CG20SW Cable Seal 2-10mm Wire Size White Powder Coated SS Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview SVLTP36LEDBLK 36 Light Post with LTBLED12 Navigation Light -Black

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.

Includes LTBLED12 round Seaview 3NM LED combination mast head allround light

• SVLTP36 36 in Light Post - Black
• LTBLED12 Navigation Light
"

Seaview SVLTP12LED 36in Light Post with LTBLED12 Navigation Light

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25in in diameter with a 2.75in round base plate.

Includes LTBLED12 round Seaview 3NM LED combination mast head allround light

• SVLTP36 36in Light Post
• LTBLED12 Navigation Light

Seaview SVLTP36LED 36 Light Post with LTBLED12 Navigation Light

Seaview’s light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25 in in diameter with a 2.75 in round base plate.

Includes LTBLED12 round Seaview 3NM LED combination mast head allround light.

• SVLTP36 36 in Light Post
• LTBLED12 Navigation Light
"

Seaview SVRCLMINI Secure Mounting Kit for Starlink Mini

The SVRCLMINI offers versatile mounting solutions for your Starlink Mini, with two secure options:

Option 1: Mount directly to a rail that is 1in, 1 1/8in or 1 1/4in in diameter.

Option 2: Thread this onto a 1-14in threaded antenna mount (antenna mount not included).**

Option 3: Thread this onto a Seaview S.S. rail clamp. This can be ideal if removed often.

This kit includes a robust Mini mount bracket that locks firmly into the Starlink Mini antenna base, ensuring stability (see installation instructions for details). All necessary components for both mounting configurations are provided, delivering flexibility and reliability for your setup.

p>Seaview SVRCLMINIRCL1 Rail Mount and Base for Starlink Mini

The SVRCLMINI offers versatile mounting solutions for your Starlink Mini, with two secure options: Option 1: Mount directly to a rail that is 1in, 1 1/8in or 1 1/4in in diameter. Option 2: Thread this onto a 1-14in threaded antenna mount (antenna mount not included). Option 3: Thread this onto a Seaview S.S. rail clamp. This can be ideal if removed often.

This kit includes a robust Mini mount bracket that locks firmly into the Starlink Mini antenna base, ensuring stability (see installation instructions for details). All necessary components for both mounting configurations are provided, delivering flexibility and reliability for your setup.

Seaview CG30PG Cable Seal Up to 27mm Wire size Black Plastic Housing 2-15mm Wire size Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED. Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CG30PG Cable Seal 2-15mm Wire size Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED. Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CG30PG2 RetroFit Cable Seal 2-15mm Wire size Grey Plastic Cover

The Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables. In a new category of its own, the new Retrofit Cable Seal provides a watertight installation for your currently installed cables. No need to re-run your cables, simply install with your cable in place! The Seaview Retrofit Cable Seals provide a waterproof pass-through for antenna, transducer, lights, power and other cables without removal of the factory installed cable connector.

These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CG30PW Cable Seal Up to 27mm Wire size White Plastic Housing 2-15mm Wire size Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED. Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview SVSLWBLED Angled Wedge base and LED Light for Starlink - White

• Designed to fit the Starlink Flat High Performance Antenna.
• Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
• Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
• No need to cut the Starlink connectors for installation.

This Seaview wedge base kit caters to installations with restricted space, where additional height isn’t required, yet an LED navigation light remains essential.

This kit comes with all the Seaview parts necessary to install the Starlink Flat High Performance antenna on the 8 deg wedgebase, along with the 3NM LED combination mast head allround light. The LED light is IP67 watertight with 7 feet of wire (12v) and USCG approved for boats up to 20 meters (65.6 feet) in length.

The aluminum light bar and 8 deg wedge base for the Starlink Flat High Performance antenna have been specifically designed for the marine environment (3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).

• Wedge Mount - White
• Lichtbar - White
• LED 3nm Combo Mast head light
• CG30PW (White) cable seal

Seaview SVSLWBBKLED Angled Wedge base and LED Light for Starlink - Black

• Designed to fit the Starlink Flat High Performance Antenna.
• Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
• Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
• No need to cut the Starlink connectors for installation.

This Seaview wedge base kit caters to installations with restricted space, where additional height isn’t required, yet an LED navigation light remains essential.

This kit comes with all the Seaview parts necessary to install the Starlink Flat High Performance antenna on the 8 deg wedgebase, along with the 3NM LED combination mast head allround light. The LED light is IP67 watertight with 7 feet of wire (12v) and USCG approved for boats up to 20 meters (65.6 feet) in length.

The aluminum light bar and 8 deg wedge base for the Starlink Flat High Performance antenna have been specifically designed for the marine environment (3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).

• Wedge Mount - Black
• Lichtbar - Black
• LED 3nm Combo Mast head light
• CG30PB (black) cable seal

Seaview SVSLWBLEDC5 Wedge Base For Starlink - White With LED Light

• Designed to fit the Starlink Flat High Performance Antenna.
• Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
• Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
• No need to cut the Starlink connectors for installation.
• Available in white or black

This Seaview wedge base kit caters to installations with restricted space, where additional height isn’t required, yet an LED navigation light remains essential.

This kit comes with all the Seaview parts necessary to install the Starlink Flat High Performance antenna on the 8 deg wedgebase, along with the 3NM LED combination mast head allround light. The LED light is IP67 watertight with 7 feet of wire (12v) and USCG approved for boats up to 20 meters (65.6 feet) in length.

The aluminum light bar and 8 deg wedge base for the Starlink Flat High Performance antenna have been specifically designed for the marine environment (3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).

Seaview CG30SB Cable Seal 2-15mm Wire size Black powder Coated SS Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CG30SS Cable Seal 2-15mm Wire size Polished SS Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CG30SW Cable Seal 2-15mm Wire size White powder Coated SS Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED! Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CGM17PB Cable Seal Multiple Wires sizes up to 10.6mm Black Plastic Housing Multi Cable 2-17mm Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CGM17PG Cable Seal Multi Cable 2-17mm Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CGM17PW Cable Seal Multiple Wires sizes up to 10.6mm White Plastic Housing Multi Cable 2-17mm Grey Plastic Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CGM17SB Cable Seal Multi Cable 2-17mm Black Powder Coated SS Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CGM17SB Cable Seal Multi Cable 2-17mm Black Powder Coated SS Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION: Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others.

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CGM17SW Cable Seal Multi Cable 2-17mm White Powder Coated SS Cover

• NO NEED TO REMOVE CONNECTORS: The split seal design eliminates the need to remove cable connectors during installation.
• WATERTIGHT INSTALLATION:Tapered rubber seal forms watertight installation. Base gasket also provided for clean, watertight installation. Waterproof rating of IPX6 and IPX7.
• IMPROVED SHAPE AND DESIGN: Low profile design for a strong, impact-resistant and clean installation. No sharp edges.
• DRILL TUBES INCLUDED: Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pcs that will end up in the landfill from others!

The Seaview Cable Seals (also known as CableClams, Cable Glands or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67 in to 1.38 in) connectors, making it ideal for almost every installation.

All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125 of rubber around each hole.

Seaview CGM90W Cable Seal Multi Cable up to 6.35mm Multi Cable up to 6.35mm

• Improved Shape & Design: Low profile design for a strong, impact-resistant and clean installation (no sharp edges to hit your foot on). Unlike other brands, our inner rubber seal is flush with the top of the Cable Gland so that water does not have a place to collect.
• Watertight: Tapered rubber seal forms watertight installation. Base gasket also provided for clean water tight installation. Seaview Cable Glands have waterproof ratings of IPX6 and IPX7.
• Easy Installation: Each Cable Gland is supplied with a blank rubber tapered seal that has a molded location to drill and cut. Captive nuts make for easy assembly. Cable connectors do not need to be removed during installation. Stainless steel fasteners included.

The Seaview horizontal cable seals (90 degree cable seal) are a streamlined, waterproof seal that has a horizontal orientation.

The CG2090W cable seal fits cable diameters up to 0.53 in (13.5mm). Max connector size approx. 0.375-0.5 in (9.5mm-12.7mm) depending on connector length and type.

The CGM90W cable seal fits cable diameters up to 0.25 in (6.35mm). Max connector size approx. 0.3125 in-0.375 in (7.94mm-9.53mm) depending on connector length and type.

These have a plastic housing (white or black) that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approved.

These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125 in of rubber around each hole.

PYI 1.5 in Thermal Camera Top Down Riser (MD or T200 series) / Mount vertical or upside down

Ever wanted to hang your FLIR MD-Series or Raymarine T200-Series upside down? Well now you can with the Seaview Top Down Riser. Made from Kingstarboard a durable weather resistant marine grade polymer.

For mounting Flir MD series or Raymarine T200 Series. Can be mounted rightside up or upside down.

Seaview CGM90 Cable Seal Multi Cable up to 6.35mm Black Plastic Cover

• Improved Shape & Design: Low profile design for a strong, impact-resistant and clean installation (no sharp edges to hit your foot on). Unlike other brands, our inner rubber seal is flush with the top of the Cable Gland so that water does not have a place to collect.
• Watertight: Tapered rubber seal forms watertight installation. Base gasket also provided for clean water tight installation. Seaview Cable Glands have waterproof ratings of IPX6 and IPX7.
• Easy Installation: Each Cable Gland is supplied with a blank rubber tapered seal that has a molded location to drill and cut. Captive nuts make for easy assembly. Cable connectors do not need to be removed during installation. Stainless steel fasteners included.

The Seaview horizontal cable seals (90 degree cable seal) are a streamlined, waterproof seal that has a horizontal orientation.

The CG2090 series cable seal fits cable diameters up to 0.53 in (13.5mm). Max connector size approx. 0.375-0.5 in (9.5mm-12.7mm) depending on connector length and type.

The CGM90 series cable seal fits cable diameters up to 0.25 in (6.35mm). Max connector size approx. 0.3125 in-0.375 in (7.94mm-9.53mm) depending on connector length and type.

These have a plastic housing (white or black) that is strong and impact-resistant with a captive nut in the base to make it easy to assemble. The tapered rubber bung forms a watertight seal and is supplied with drill tubes allowing you to drill your own custom diameter seal. This is also supplied with a thick rubber base gasket. IPX6 / IPX8 tested and approved.

These Cable Seals will work with more than one cable as long as each cable has its own hole and there is at least .125 in of rubber around each hole.

Seaview LTB-90 Quick Fold Over Kit for LTB-R, LTB-S, LTB-S24 and LTB-13

The LTB90 from Seaview is an add-on component that aids in a quick, tool-free fold over for a Seaview light bar. Great for trailering, dry-stack storage, and winter wrapping your vessel.

The LTB90 is compatible with the following light bars: LTBR, LTBS, LTBS24, LTB13, & LTBRSS. This kit will only work with Seaview top plates ADAR1, ADAS1 & ADAS2 when spreaders are NOT used. Contact Seaview if this is needed for another application.

Seaview LTBS24BLK Black Lightbar

The new Seaview light bar has a unique design that allows it to fold over 90 degrees. This light bar is 1 1/4 in diameter and is powder coated white. This light bar fits Satdomes that are 24 in diameter. Please note that a light bar top is required (sold separately).

Seaview LTBSF4 Lightbar

Compact Light bar for thermal cameras* or spotlights and nav light to clear closed dome radars**

Must pick a LTB TOP

* Will work for all FLIR models, WITH THE EXCEPTION OF THE FLIR M300C, M332, M364, M364C

**Will clear 18-24 in closed dome radars

Seaview LTBU1ALED12 Universal Top mount with 12 Light Bar and LTBLED12 Light

• LTBU1A Universale Top Mount
• SVLTP12 12in Light Post
• LTBLED12 Round Seaview 3NM LED combination mast head allround ligh
"

Seaview LTBU1ALED12C5 Universal Top mount with 12in Light Bar and LTBLED12 Light

Universal light bar top for GPS or wind instrument with 12in light post and LED nav light (LTBU1A + SVLTP12 + LTBLED12C5)

• LTBU1A Universale Top Mount
• SVLTP12 12in Light Post
• LTBLED12 Round Seaview 3NM LED combination mast head allround ligh

PYI 5 Thermal Camera Mount Vertical

A 5 in tall vertical mount for thermal cameras. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 8 in in diameter.

For FLIR MD and Raymarine T200 series

Seaview PM5FM38 5 Mount

For M300 Series

Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5 in - 5.63 in clearing anything that will obstruct your cameras view. The 8 in diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.

No visible bolts on the camera mounting plate provides extra security and improved aesthetics.

This mount is the perfect solution for installations where space is limited.

Seaview 5 Vertical Mount with 8 in Round Base for Searchlights

Improve your search lights performance with a Seaview Search Light Mount. This aft leaning mount will raise your Search Light 5.25 in. The 8 in diameter base takes up very little space.

Four pre-drilled mounting holes at the base make for an easy installation. Search Light mounts using your own bolts and hardware.

The hollow mast section provides plenty of room to run all the cabling.

This Seaview Search Light Mount is the perfect solution if you want to get the most out of your Search Light but are limited on space.

Seaview PM5SXN8 5 Verticle Mount for Sionyx Nightwave

Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5 in - 5.75 in clearing anything that will obstruct your cameras view. The 8 in diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.

No visible bolts on the camera mounting plate provides extra security and improved aesthetics.

This mount is the perfect solution for installations where space is limited.

Seaview PM5SXN8BLK 5 Verticle Mount for Sionyx Nightwave - Black

Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5 in - 5.75 in clearing anything that will obstruct your cameras view. The 8 in diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.

No visible bolts on the camera mounting plate provides extra security and improved aesthetics.

This mount is the perfect solution for installations where space is limited.

The10" tall Seaview aft leaning mount for is Closed Dome Radars and small Satdomes (16 in diameter or smaller). The oval hollow mast section allows for easy cable management. The small 7"x7" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)*