NMEA 2000® Trim Tab Indicator Kit

See the position of your trim tabs on your NMEA 2000 compatible Multi-Function Display or Gauge, GPS/Chart Plotter, or Sonar! The interface kit will fit all Bennett Trim Tab systems and is compatible with LowranceNET and other NMEA 2000 compliant electronics.

Save Time and Money!

• No need to buy a separate display for your trim tabs.
  
• Compatible with NMEA 2000 networks.
  
• See your trim tab position on your GPS, Chart Plotter, or Sonar
  
• Kit comes with Bennett Trim Tab Sensors, Interface Module, and LowranceNET connectors.

Auto Tab Control

Get a Perfectly Trimmed Boat - Every Time!

Bennett Marine pioneered the Auto Tab Control (ATC) to make the boater’s experience on the water even better. It does exactly what it says it does - interacting directly with your trim tab system to automatically monitor your boat’s position and maintain the perfect cruising attitude.

Major Benefits:

• Saves you money on fuel. A properly trimmed boat can significantly lower fuel costs in a single season of usage.
  
• Easy to install - just plug and play! Very few tools are needed for installation, and everything plugs right into the ATC Control Unit.
  
• No more guesswork - it trims the boat better than you can. Calculating more than a thousand attitude readings per second, the ATC adjusts your trim tabs to changes in vessel speed, sea conditions and shifting weight.
  
• The most comfortable ride you’ve ever had on your boat. Maintain the best cruising attitude without the need to work manual trim controls.

This is the replacement actuator with internal tubing.

 The Bennett Auto Tab Retractor (ATR) adds even more convenience to easy trim tab operation. Everytime you turn your engine’s ignition key to the "off" position, the trim tabs automatically retract to their full-up position. Reduce risk of trim tab damage from fork lifts and trailers, minimize marine growth, and know the position of your trim tabs each time you get underway.

 The Bennett Auto Tab Retractor (ATR) adds even more convenience to easy trim tab operation. Everytime you turn your engine’s ignition key to the "off" position, the trim tabs automatically retract to their full-up position. Reduce risk of trim tab damage from fork lifts and trailers, minimize marine growth, and know the position of your trim tabs each time you get underway.

The Power Of Hydraulic Hatch Lifting At Your Fingertips! There is no need to manually raise a hatch again. The Bennett Hatch Lifter provides a firm vertical lift to engine or deck hatches at the simple press of a switch. Operation is quiet, smooth, space and cost efficient for opening common hatches normally lifted by hand. Using proven Bennett hydraulic technology, the Hatch Lifter is an easy retrofit for boats already equipped with Bennett Trim Tabs - the Hatch Lifter shares the trim tab Hydraulic Power Unit! Hatch Lifter kits which operate independently of the trim tabs are also available.

The Power Of Hydraulic Hatch Lifting At Your Fingertips! There is no need to manually raise a hatch again. The Bennett Hatch Lifter provides a firm vertical lift to engine or deck hatches at the simple press of a switch. Operation is quiet, smooth, space and cost efficient for opening common hatches normally lifted by hand. Using proven Bennett hydraulic technology, the Hatch Lifter is an easy retrofit for boats already equipped with Bennett Trim Tabs - the Hatch Lifter shares the trim tab Hydraulic Power Unit! Hatch Lifter kits which operate independently of the trim tabs are also available.

The Power Of Hydraulic Hatch Lifting At Your Fingertips! There is no need to manually raise a hatch again. The Bennett Hatch Lifter provides a firm vertical lift to engine or deck hatches at the simple press of a switch. Operation is quiet, smooth, space and cost efficient for opening common hatches normally lifted by hand. Using proven Bennett hydraulic technology, the Hatch Lifter is an easy retrofit for boats already equipped with Bennett Trim Tabs - the Hatch Lifter shares the trim tab Hydraulic Power Unit! Hatch Lifter kits which operate independently of the trim tabs are also available.

The Power Of Hydraulic Hatch Lifting At Your Fingertips! There is no need to manually raise a hatch again. The Bennett Hatch Lifter provides a firm vertical lift to engine or deck hatches at the simple press of a switch. Operation is quiet, smooth, space and cost efficient for opening common hatches normally lifted by hand. Using proven Bennett hydraulic technology, the Hatch Lifter is an easy retrofit for boats already equipped with Bennett Trim Tabs - the Hatch Lifter shares the trim tab Hydraulic Power Unit! Hatch Lifter kits which operate independently of the trim tabs are also available.

See the position of your trim tabs on your NMEA 2000 compatible multi-function display or gauge, GPS/chartplotter or sonar. (Display not included in kit.) One-year warranty.

Compatible with NMEA 2000® compliant electronics. IMPORTANT: Contact your electronics manufacturer first to verify compatibility. To determine compatibility, ask if the manufacturer has 1) Implemented the trim tab portion of the NMEA standard (ability to view the tabs), and 2) Enabled the ability to configure calibration (see movement of the tabs).

The kit comes with (see numbered items in photo - click here for enlarged photo):

1) White plastic clip - used to snap on actuator piston shaft when installing new upper hinges with sensors
2) Red butt connectors ? used to connect sensors with the NMEA1 Module
3) NMEA1 Module ? connects Bennett trim tab sensors to NMEA-compatible electronics
4) Upper Hinges with coil (1 with red sensor wire and 1 with green sensor wire) ? measure trim tab position
5) Two sensor rods ? measure trim tab position

High bow on take-off, pounding, porpoising, and excessive use of the engine’s power trim are factors reducing the efficiency of high performance fishing boats. You may also find yourself needing a high throttle setting just to stay on plane. With a unique batwing design and a hightech black powder coated finish, Tournament Tabs are engineered to fit your small boat. They increase stability, versatility, and overall performance, helping your boat run on plane in shallow water - even at slower speeds. Tournament Tabs are hydraulically adjustable, putting total attitude control at your fingertips.

High bow on take-off, pounding, porpoising, and excessive use of the engine’s power trim are factors reducing the efficiency of high performance fishing boats. You may also find yourself needing a high throttle setting just to stay on plane. With a unique batwing design and a hightech black powder coated finish, Tournament Tabs are engineered to fit your small boat. They increase stability, versatility, and overall performance, helping your boat run on plane in shallow water - even at slower speeds. Tounament Tabs are hydraulically adjustable, putting total attitude control at your fingertips.

Bennett’s new M80 and M120 Sport Tabs are ideal for boats in the 17’ - 23’ range. Their unique Batwing design provides 30% more lift than conventional Trim Tabs. Space saving design insures easy installation on virtually any transom.

Designed with ease of installation in mind the M80 and M120 Kits include an installation video.

Bennett’s new M80 and M120 Sport Tabs are ideal for boats in the 17’ - 23’ range. Their unique Batwing design provides 30% more lift than conventional Trim Tabs. Space saving design insures easy installation on virtually any transom.

Designed with ease of installation in mind the M80 and M120 Kits include an installation video.

Bennett’s new M80 and M120 Sport Tabs are ideal for boats in the 17’ - 23’ range. Their unique Batwing design provides 30% more lift than conventional Trim Tabs. Space saving design insures easy installation on virtually any transom.

Designed with ease of installation in mind the M80 and M120 Kits include an installation video.

This kit includes a TPI system with sensors preinstalled in the actuators.

Backed by nearly 40 years of trim tab experience, Bennett Sport Tabs are engineered for the demands of offshore attitude correction. Performance boats that are run at speeds of 60 mph require the rugged construction and enjoy the sophisticated black powder coated finish of Sport Tabs. Manufactured with heavy gauge reinforced stainless steel and powerful dual hydraulic actuators, Sport Tabs combine strength, durability, and good looks to achieve your boat’s maximum potential.

Know The Position Of Your Trim Tabs! Bennett Tab Positon Indicator (TPI) accurately indicates the position of each trim tab adding precision and confidence to trim tab operation.

The TPI helm display accurately shows deflection percentage of each trim tab, and the LED brighness is adjustable for any lighting condition.

They are easily retrofitted to existing Bennett Trim Tabs, and can be adapted to Boat Leveler brand Instatrim systems. The TPI keeps you fully informed for maximum efficiency, performance, and total control of your trim tab system.

Know The Position Of Your Trim Tabs! Bennett Tab Positon Indicator (TPI) accurately indicates the position of each trim tab adding precision and confidence to trim tab operation.

The TPI helm display accurately shows deflection percentage of each trim tab, and the LED brighness is adjustable for any lighting condition.

They are easily retrofitted to existing Bennett Trim Tabs, and can be adapted to Boat Leveler brand Instatrim systems. The TPI keeps you fully informed for maximum efficiency, performance, and total control of your trim tab system.

Bennett’s new M80 and M120 Sport Tabs are ideal for boats in the 17’ - 23’ range. Their unique Batwing design provides 30% more lift than conventional Trim Tabs. Space saving design insures easy installation on virtually any transom.

Designed with ease of installation in mind the M80 and M120 Kits include an installation video.

This kit includes a TPI system with sensors preinstalled in the actuators.

The Electronic Indicator Control (EIC5000) combines the popular Bennett rocker switch, trim tab indicator, and Auto Tab Retractor. Like the Tab Position Indicator, it is waterproof, highly accurate and features variable intensity LED’s for night or day. The EIC can be retrofitted onto any existing Bennett hydraulic trim tab system, and is backed by a three year warranty.

The EIC features a relay module mounted near the transom. This simplifies the installation by reducing the number of wires to run to the helm.
 

`

Get a Perfectly Trimmed Boat - Every Time!

Bennett Marine pioneered the Auto Tab Control (ATC) to make the boater?s experience on the water even better. It does exactly what it says it does ? interacting directly with your trim tab system to automatically monitor your boat?s position and maintain the perfect cruising attitude.

Major Benefits:

• Saves you money on fuel. A properly trimmed boat can significantly lower fuel costs in a single season of usage.
• Easy to install - just plug and play! Very few tools are needed for installation, and everything plugs right into the ATC Control Unit.
• No more guesswork - it trims the boat better than you can. Calculating more than a thousand attitude readings per second, the ATC adjusts your trim tabs to changes in vessel speed, sea conditions and shifting weight.
• The most comfortable ride you?ve ever had on your boat. Maintain the best cruising attitude without the need to work manual trim controls.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged. Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

Backed by nearly 40 years of trim tab experience, Bennett Sport Tabs are engineered for the demands of offshore attitude correction. Performance boats that are run at speeds of 60 mph require the rugged construction and enjoy the sophisticated black powder coated finish of Sport Tabs. Manufactured with heavy gauge reinforced stainless steel and powerful dual hydraulic actuators, Sport Tabs combine strength, durability, and good looks to achieve your boat’s maximum potential.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page

Each Kit Includes:Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.   Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout. Hydraulic power unit, color-coded wiring harness, and mounting hardware. Five Year Manufacturer’s Warranty

The Power Of Hydraulic Hatch Lifting At Your Fingertips! There is no need to manually raise a hatch again. The Bennett Hatch Lifter provides a firm vertical lift to engine or deck hatches at the simple press of a switch. Operation is quiet, smooth, space and cost efficient for opening common hatches normally lifted by hand. Using proven Bennett hydraulic technology, the Hatch Lifter is an easy retrofit for boats already equipped with Bennett Trim Tabs - the Hatch Lifter shares the trim tab Hydraulic Power Unit! Hatch Lifter kits which operate independently of the trim tabs are also available.

The Power Of Hydraulic Hatch Lifting At Your Fingertips! There is no need to manually raise a hatch again. The Bennett Hatch Lifter provides a firm vertical lift to engine or deck hatches at the simple press of a switch. Operation is quiet, smooth, space and cost efficient for opening common hatches normally lifted by hand. Using proven Bennett hydraulic technology, the Hatch Lifter is an easy retrofit for boats already equipped with Bennett Trim Tabs - the Hatch Lifter shares the trim tab Hydraulic Power Unit! Hatch Lifter kits which operate independently of the trim tabs are also available.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

The Electronic Indicator Control (EIC5000) combines the popular Bennett rocker switch, trim tab indicator, and Auto Tab Retractor. Like the Tab Position Indicator, it is waterproof, highly accurate and features variable intensity LED’s for night or day. The EIC can be retrofitted onto any existing Bennett hydraulic trim tab system, and is backed by a three year warranty.

The EIC features a relay module mounted near the transom. This simplifies the installation by reducing the number of wires to run to the helm.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

The Electronic Indicator Control (EIC5000) combines the popular Bennett rocker switch, trim tab indicator, and Auto Tab Retractor. Like the Tab Position Indicator, it is waterproof, highly accurate and features variable intensity LED’s for night or day. The EIC can be retrofitted onto any existing Bennett hydraulic trim tab system, and is backed by a three year warranty.

The EIC features a relay module mounted near the transom. This simplifies the installation by reducing the number of wires to run to the helm.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Tab Position Indicator

Description: Attractive, compact, water resistant and easy to install. The TPI helm display accurately shows deflection percentage of each trim tab, and the LED brightness is adjustable for any lighting condition. Works with all Bennett Trim Tabs.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

The Electronic Indicator Control (EIC5000) combines the popular Bennett rocker switch, trim tab indicator, and Auto Tab Retractor. Like the Tab Position Indicator, it is waterproof, highly accurate and features variable intensity LED’s for night or day. The EIC can be retrofitted onto any existing Bennett hydraulic trim tab system, and is backed by a three year warranty.

The EIC features a relay module mounted near the transom. This simplifies the installation by reducing the number of wires to run to the helm.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

The Electronic Indicator Control (EIC5000) combines the popular Bennett rocker switch, trim tab indicator, and Auto Tab Retractor. Like the Tab Position Indicator, it is waterproof, highly accurate and features variable intensity LED’s for night or day. The EIC can be retrofitted onto any existing Bennett hydraulic trim tab system, and is backed by a three year warranty.

The EIC features a relay module mounted near the transom. This simplifies the installation by reducing the number of wires to run to the helm.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Tab Position Indicator

Description: Attractive, compact, water resistant and easy to install. The TPI helm display accurately shows deflection percentage of each trim tab, and the LED brightness is adjustable for any lighting condition. Works with all Bennett Trim Tabs.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

The Electronic Indicator Control (EIC5000) combines the popular Bennett rocker switch, trim tab indicator, and Auto Tab Retractor. Like the Tab Position Indicator, it is waterproof, highly accurate and features variable intensity LED’s for night or day. The EIC can be retrofitted onto any existing Bennett hydraulic trim tab system, and is backed by a three year warranty.

The EIC features a relay module mounted near the transom. This simplifies the installation by reducing the number of wires to run to the helm.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

The Electronic Indicator Control (EIC5000) combines the popular Bennett rocker switch, trim tab indicator, and Auto Tab Retractor. Like the Tab Position Indicator, it is waterproof, highly accurate and features variable intensity LED’s for night or day. The EIC can be retrofitted onto any existing Bennett hydraulic trim tab system, and is backed by a three year warranty.

The EIC features a relay module mounted near the transom. This simplifies the installation by reducing the number of wires to run to the helm.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Tab Position Indicator

Description: Attractive, compact, water resistant and easy to install. The TPI helm display accurately shows deflection percentage of each trim tab, and the LED brightness is adjustable for any lighting condition. Works with all Bennett Trim Tabs.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

The Electronic Indicator Control (EIC5000) combines the popular Bennett rocker switch, trim tab indicator, and Auto Tab Retractor. Like the Tab Position Indicator, it is waterproof, highly accurate and features variable intensity LED’s for night or day. The EIC can be retrofitted onto any existing Bennett hydraulic trim tab system, and is backed by a three year warranty.

The EIC features a relay module mounted near the transom. This simplifies the installation by reducing the number of wires to run to the helm.

Bennett Hydraulic Trim Tabs
Bennett Trim Tabs are designed and manufactured at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent - not welded. Welding alters the properties of stainless steel which invites corrosion. Bennett actuators feature patented through-hull hydraulics. There are no vulnerable external hoses to decay. Plus, every Hydraulic Power Unit is tested by both person and computer to insure this reliable unit deflects the trim tabs, holds firmly during use, and retracts smoothly.

A DO-IT-YOURSELF INSTALLATION
Just a few hours and some common tools are all that is needed. Components of the Bennett system are designed and packaged with the do-it-yourselfer in mind. Every kit is complete, featuring one page step-by- step instructions, with templates, for a simple, precise, and satisfying installation.

Each Kit Includes:

• Two high-quality 304 stainless steel after-planes with strong nylon/fiberglass actuators. No external hoses to rot or become damaged.
• Euro-Style Rocker Switch designed to fit standard 1-3/8" cutout.
• Hydraulic power unit, color-coded wiring harness, and mounting hardware.
• Five Year Manufacturer’s Warranty

The Electronic Indicator Control (EIC5000) combines the popular Bennett rocker switch, trim tab indicator, and Auto Tab Retractor. Like the Tab Position Indicator, it is waterproof, highly accurate and features variable intensity LED’s for night or day. The EIC can be retrofitted onto any existing Bennett hydraulic trim tab system, and is backed by a three year warranty.

The EIC features a relay module mounted near the transom. This simplifies the installation by reducing the number of wires to run to the helm.